|
|
|
1236
Derma-RockMaker
RockMaker
is used on styrofoam, polyurethane forms, wood, plastics, or metal
surfaces as well as on building block.
| |
Use
Instructions |
| • |
Can
be used on styrofoam, polyurethane forms, wood, plastics, or
metal surfaces. |
| • |
All
surfaces to be coated must be free of dust, dirt, grease, or
oils. |
| • |
Clean
surfaces with mild detergents or alcohols and allow to dry completely
before application of 1236. |
| • |
If
coloring for effects apply first coat and allow to dry minimum
one hour. Apply subsequent coats for desired effects. |
| • |
If
dirt, rocks, sand, wood chips, styrofoam pieces are to be adhered
to building block, apply first coat to block and apply equal
coat to the wood, or styrofoam pieces. Press the pieces
to the block. Then sprinkle dirt, sand or small particles
to the wet coating on the block. Lightly press the pieces
and particles into the wet coating and allow to dry before proceeding.
|
| • |
If
using as an adhesive for gluing straw, twigs or small branches.
Push the straw, etc. into the styrofoam and squeeze a quantity
of 1236 around the straw, etc. to be adhered. |
Note:
Meets all Federal Specifications as set by EPA, CPSC, and OSHA.
(more...)
|
|
|
